Adjusting for different-size paper – BT DF450 User Manual

Page 31

Additional features

Adjusting for different-size paper

To send a different-size document

Your DF450 can send documents from
148 x 148mm up to 216 x 600mm in size. Adjust
the document feeder (if necessary) by moving
the side supports.

To receive a different-size document

The automatic sheet feeder is pre-set to take
A4 (210mm wide) paper, but can be adjusted to
take paper 216mm wide also.

•

Press the

FUNCTION

button.

•

Press the

START

button until the display

reads

SIZE:

•

Press the

ᮤ ᮣ

buttons to select between

SIZE:A4, SIZE: LETTER

and

SIZE: LEGAL

•

Press the

START

button to confirm your

selection.

•

Press the

STOP

button to return the DF450

to standby.

To change the automatic sheet feeder

cassette to take different-size paper

Your DF450 automatic sheet feeder can hold
A4 (210mm wide) or Legal (216mm wide)
paper. Adjust the automatic sheet feeder (if
necessary) by moving the side supports.

•

First remove the paper cover from the front
of the automatic sheet feeder.

•

Insert a small coin into the small groove just
in front of the hinge, this will release the
hinge to allow you to pull out the cover.

•

Insert a small coin in the groove at the
bottom of the automatic sheet feeder to
release the black side supports.

A4 I

Repeat this action for both sides of the automatic
sheet feeder.

A4 - 210mm wide, Legal and letter - 216mm wide.

START

FUNCTION