Pioneer LX01BD User Manual

Page 97

Digital audio signals are not
output from the

DIGITAL

OUT (OPTICAL) terminals
(analog audio signals are
output).

Audio Out set to audio formats supported by the connected

AV receiver or amplifier?

• Read the operating instructions of the connected AV receiver
or amplifier and check the supported audio formats.

• Set

Audio Out properly (page 82).

Noise can be heard when
outputting DTS Digital
Surround signals.

Is the connected AV receiver or amplifier compatible with DTS
Digital Surround?

If an AV receiver or amplifier that is not compatible with DTS
Digital Surround is connected to the

DIGITAL OUT terminal,

set

DTS Out to DTS

 PCM. Noise will be heard if DTS Out is

set to

DTS (page 82).

192 kHz or 96 kHz digital
audio signals cannot be
output from the

DIGITAL

OUT (OPTICAL) terminals.

It is not possible to output 192 kHz or 96 kHz digital audio
signals from this player’s

DIGITAL OUT (OPTICAL) terminals.

The signals are automatically converted to under
96 kHz for output.

Secondary audio or
interactive audio is not
output.

HDMI Audio Out properly set?

Set

HDMI Audio Out to PCM (page 83).

Are

Dolby Digital Out and DTS Out properly set?

Set

Dolby Digital Out to Dolby Digital 1, DTS Out to DTS 1

(page 82).

Sound is fast or slow.

When an HDMI cable is connected, are audio signals being
output from devices connected with cables other than HDMI
cables?

When this player is connected by HDMI cable to a Pioneer AV
receiver or amplifier compatible with the PQLS function via
HDMI connection, the PQLS function is activated when playing
a music CD (CD-DA). Because of this, the sound output from
components other than the ones connected by HDMI cable
may be fast or slow. If this happens, set

PQLS to Off (page 83).

Files recorded on discs
cannot be played.

Is the disc one that is playable on this player?

Check whether the disc is one that can be played on this player
(page 58).

Is the file one that is playable on this player?

• Check whether the file is one that can be played on this
player (page 60).

• Check whether or not the file is damaged.

Is the file protected by DRM?

Files protected by DRM cannot be played (not including DivX
VOD files).

A message indicating low
memory (local storage)
appears while playing a BD-
ROM disc.

Erase the BDMV data (page 65).

Problem

Check

Remedy

LX01BD_2.book Page 97 Friday, September 5, 2008 11:29 AM