Pioneer LX01BD User Manual

Page 15

Note

• When digital connections are used, it may be necessary to

adjust the digital audio output settings on the TV. For details,
consult the operating instructions for your TV.

• About the different types of Blu-ray disc players:

– Use the

AUDIO OUT (2 ch) and AUDIO OUT (7.1 ch) terminals

to connect a separately sold receiver and listen to 2-channel or
7.1-channel sound, respectively.

– Use the

VIDEO OUT terminals to connect to a TV not

equipped with an HDMI terminal.

Connect the power cord.

• Connect each power cord to the AC inlet on the Blu-ray disc

player and the receiver subwoofer. Connect each power cord to
a wall socket in the following order:
1. Blu-ray disc player
2. Receiver subwoofer
3. TV

• Run the cords that are connected to the side panel of the

receiver subwoofer over the back side of the unit, and replace
the cover on the side panel.

Note

• Do not use any power cord other than the one supplied with this

system.

• Do not use the supplied power cord for any purpose other than

connecting to this system.

• After connecting this unit to an AC outlet, a 15-second

initialization process begins. You cannot carry out any
operations during initialization. The HDMI indicator on the
display unit blinks during initialization, and you can turn this
unit on once it has stopped blinking.

AC IN

To AC outlet

Blu-ray disc player

Receiver subwoofer

LX01BD_1.book Page 15 Tuesday, September 2, 2008 12:33 PM