Pioneer LX01BD - Manual (Page 62)

02
62
En
Chapter 2
Getting Started
Important
• Press BD (HDMI 1) to set the remote control to BD control mode
in order to operate the Blu-ray disc player.
• The BD settings are listed on two separate pages. To cycle
between pages, use the PAGE button.
Making settings using the
Setup Navigator menu
Be sure to perform these settings when using the player for the first
time.
Caution
• Before turning on the power, check that the connections
between the player and other devices are correct.
1 Turn on the power.
Press SYSTEM ON.
2 Turn on the TV’s power and switch the input.
See the TV’s operating instructions for instructions on operating the
TV.
Check that the Setup Navigator menu is displayed.
If TV Control is set, the TV can be operated with the receiver
subwoofer’s remote control (page 64).
 If the Setup Navigator menu is not
displayed
 Press HOME MENU to display the Home Menu, select Initial
Setup
 Setup Navigator  Start, then press ENTER.
3 Select the OSD language.
Use / to select, then press ENTER.
When you have this player connected to a Pioneer Flat Screen TV
that is compatible with HDMI Control, language settings are
imported from the Pioneer Flat Screen TV’s language settings before
Setup Navigator begins.
4 Select and set the video and audio output terminals.
Select the actually connected video and audio output terminals.
This system uses the HDMI terminal.
Use /// to select HDMI for both Video and Audio, then
press ENTER.
Proceed to Step 5.
• When Component Video is selected for Video, proceed to
step 6.
• When S-Video/Video is selected for Video, proceed to step 7.
BD 1/2
BD DVR DVD TV
FM / AM   INPUT
SELECT
HDMI 1 HDMI 2 HDMI 3
BD
HDMI 1
BD 1/2
INPUT 
BD DVR DVD TV
ON SYSTEM OFF
HDMI 1 HDMI 2 HDMI 3
TV
ON SYSTEM
SETUP
TOP MENU
DISC
NAVIGATOR
HOME
MENU
TOOLS
MENU
RETURN
Setting item Output terminal name
Vid
e
o
HDMI HDMI Output
Component Video Video Output Component Video
S-Video/Video S-Video
Video
Au
di
o
HDMI HDMI Output
Digital Audio Digital Audio
Output Optical
Analog Audio Audio Output (2 ch)
Audio Output (7.1 ch)
Setup Navigator
BD PLAYER
Please select the on-screen display language.
Audio, subtitle and BDMV/DVD-Video menu
language will also be set.
SETUP
TOP MENU
DISC
NAVIGATOR
HOME
MENU
TOOLS
MENU
RETURN
Setup Navigator
BD PLAYER
Select the output terminals to be used for
the video and audio signals of this player.
Use [ ][ ] to select video or audio, then
press [ ][ ] to select the output terminal.
HDMI
HDMI
Video
Audio
LX01BD_2.book Page 62 Friday, September 5, 2008 11:29 AM