Using, Using the position selector, Available accessories – Pioneer DVH-P590MP User Manual

Page 70: Using the dolby pro logic ii

Using the position selector

One way to assure a more natural sound is to
accurately position the stereo image, putting
you right in the center of the sound field. The
position selector function lets you automati-
cally adjust the speaker output levels and in-
serts a delay time to match the number and
position of occupied seats. When used in con-
junction with the SFC, the feature will make
the sound image more natural and offer a pa-
noramic sound that envelops you.

Press AUDIO to select POSI.

Press c/d/a/b to select a listening po-

sition.
Press one of these, c/d/a/b, to select a lis-
tening position as listed in the table.

Button

Display

Position

FRT-L

Front seat left

FRT-R

Front seat right

FRONT

Front seats

ALL

All seats

# To cancel the selected listening position,
press the same button again.

Note

When you make adjustments to the listening po-
sition, the speaker outputs are automatically set
for appropriate levels. You can tailor the levels
more precisely referring to Adjusting the speaker
output levels using a test tone or Adjusting the
speaker output levels.

Using the Dolby Pro Logic II

Dolby Pro Logic II creates five full-bandwidth
output channels from two-channel sources to
achieve high-purity matrix surround.

! If both the center and the rear speakers are

set to

OFF, you cannot use this function.

! Dolby Pro Logic II supports up to 48kHz

sampling rate stereo source and has no ef-
fect on other types of source.

Press AUDIO to select PLII.

Press c or d to select the desired

mode.

! MOVIE – The Movie mode suitable for

movie playback

! MUSIC – The Music mode suitable for

music playback

! MATRX – The Matrix mode for when FM

radio reception is weak

! OFF – Turn Dolby Pro Logic II off

# You can adjust the music mode only when
MUSIC has been selected.

Adjusting the Music mode

You can adjust the Music mode with the fol-
lowing three controls.
You can adjust the music mode only when
MUSIC has been selected.
When the subwoofer output is on, you can ad-
just the cut-off frequency and the output level
of the subwoofer.
! Panorama (PANO) extends the front stereo

image to include the surround speakers for
an exciting

“wraparound” effect.

! Dimension (DIMENSN) allows you to gra-

dually adjust the sound field either towards
the front or the rear.

! Center Width Control (CENTER) allows cen-

ter-channel sounds to be positioned be-
tween the center speaker and the left/right
speakers. It improves the left-center-right
stage presentation for both the driver and
the front passenger.

Press AUDIO to select adjusting music

mode.

Available accessories

Section