Pioneer DVH-P590MP - Manual (Page 51)

1 Press FUNCTION to select CLOCK AJST.
2 Press c or d to select the segment you
wish to set.
Hour
—Minute
As you select segments of the clock display
the segment selected will blink.
3 Press a or b to set the clock.
Pressing a will increase the value of the se-
lected segment. Pressing b will decrease the
value of the selected segment.
Turning the off clock display on
or off
If the off clock display is turned on, when the
sources are off, the clock appears on the dis-
play.
1 Press FUNCTION to select OFFCLK.
2 Press a or b to turn OFFCLK on or off.
Setting the FM tuning step
Normally the FM tuning step employed by
seek tuning is 50 kHz. When AF or TA is on,
the tuning step automatically changes to 100
kHz. It may be preferable to set the tuning step
to 50 kHz when AF is on.
1 Press FUNCTION to select FM STP.
2 Press c or d to select the FM tuning
step.
Pressing c or d will switch the FM tuning
step between 50 kHz and 100 kHz while AF or
TA is on. The selected FM tuning step will ap-
pear in the display.
Note
The tuning step remains at 50 kHz during manual
tuning.
Switching Auto PI Seek
The unit can automatically search for a differ-
ent station with the same programming, even
during preset recall.
1 Press FUNCTION to select AUTOPI.
2 Press a or b to turn AUTOPI on or off.
Switching the warning tone
If the front panel is not detached from the
head unit within five seconds of turning off the
ignition, a warning tone will sound. You can
turn off the warning tone.
1 Press FUNCTION to select WARN.
2 Press a or b to turn WARN on or off.
Switching the auxiliary setting
Auxiliary equipments connected to this unit
can be activated individually. Set each AUX
source to ON when using. About connecting
or using auxiliary equipments, refer to Using
the AUX source on page 55.
Switching the auxiliary 1 setting
1 Press FUNCTION to select AUX1.
2 Press c or d to select desired setting.
! VIDEO – an iPod with video capabilities
connected with 4-pole mini plug cable (e.g.,
CD-V150M)
! AUDIO – auxiliary equipment connected
with stereo mini plug cable
! OFF – No auxiliary equipment is connected
Switching the auxiliary 2 setting
1 Press FUNCTION to select AUX2.
2 Press a or b to turn AUX2 on or off.
Operating this unit
En
51
Section
03
Operating
this
unit