Pioneer DVH-P590MP - Manual (Page 68)

% During compressed audio playback,
press FUNCTION to display the function
names.
Press
FUNCTION repeatedly to switch be-
tween the following functions:
REPEAT (repeat play)
—RANDOM (random
play)
—SCAN (scan play)—PAUSE (pause)
% During CD playback, press FUNCTION to
display the function names.
Press
FUNCTION repeatedly to switch be-
tween the following functions:
REPEAT (repeat play)
—RANDOM (random
play)
—SCAN (scan play)—ITS (ITS play)—
PAUSE (pause)
Note
When using this unit with multi-DVD player, you
can switch to
ITS.
Digital Signal Processor
Introduction of DSP adjustments
You can use this unit to control multi-channel
processor (e.g. DEQ-P6600), which is sold sepa-
rately.
! Some functions may differ depending on the
multi-channel processor connected to this
unit.
By carrying out the following settings/adjust-
ments in the order shown, you can create a fi-
nely-tuned sound field effortlessly.
1 Setting the speaker setting
2 Using the position selector
3 Auto TA and EQ (auto-time alignment and auto-
equalizing)
4 Adjusting the time alignment
5 Adjusting the speaker output levels using a
test tone
6 Selecting a cross-over frequency
7 Adjusting the speaker output levels
8 Adjusting 3-band parametric equalizer
When the separately sold display is
connected to this unit
When the separately sold display is connected
to this unit, the setting display will appear on it.
In this manual, operations are described with
head unit
’s buttons and display.
Available accessories
En
68
Section
04