B&K CT600 - Manual (Page 27)

AM Loop Antenna
Two internal AM/FM tuners included in CT610,310 & 602. The tuner requires a single coaxial FM antenna
oriented for best tuner frequency reception. The signals are internally split to eliminate the need for dual
antennas. Single tuner included with CT600/300.
F M
A N T E N N A
F M
A N T E N N A
R F R E M O T E I N
A M A N T E N N A
FM Antenna
Two internal AM/FM tuners included in CT610,310 & 602. The tuner requires a single coaxial FM antenna
oriented for best tuner frequency reception. The signals are internally split to eliminate the need for dual
antennas. Single tuner included with CT600/300.
RF Remote IN
This connection is unsupported.
Factory Reset
Sometimes a factory reset is necessary in order to clear problematic symptoms sometimes experienced in
the field. A factory reset will clear all system settings, all presets, and all serial macros. A factory reset will
also clear any information backed up onto the EEPROM that may have been accomplished by a Memory
Backup.
Factory Reset On a CT610 or CT310
Simultaneously press and release the Sleep, Down and Zone buttons.
Once you see "Format Filesys" on the front panel you can release the buttons. A reset will take approxi-
mately 60 seconds to execute.
Factory Reset On a CT600/300/602 with no front panel buttons
The factory reset is located in the on screen menu that can be viewed through the zone A video output. It is
located in the Memory/Backup restore option. Using a IR control device in zone A press [menu - 5 - left -
enter]. A factory reset takes approximately 60 seconds to execute.
Additional Connections
B K
&
S B
I M P LY E T T E R !
23
F M
A N T E N N A
R F R E M O T E I N
A M A N T E N N A
F M
A N T E N N A
R F R E M O T E I N
A M A N T E N N A