B&K CT600 - Manual (Page 21)

Example Shared Source Connection to a CT Receiver
Shared Source Connections
B K
&
S B
I M P LY E T T E R !
17
Any source that is desired to be shared throughout the system should be connected to one of the 9 A/V
Source Inputs. Up to nine sources can be "shared" throughout any zone in the entire system. Internal tuners
in the CT receiver products do not utilize an input. Each of the nine shared sources should be connected as
follows:
Use the analog audio and composite video
from the source. The CT receiver(s) does
not process any digital signals. Composite
video and analog audio can be distributed
throughout the system.
Mount the IR Emitter on the
front panel, in front of the
IR receptacle of the source.
CT Receiver Connection
Plug the analog audio L&R com-
posite video, and the IR emitter
into the back panel.
Source