Pioneer VSX-D810S - Manual (Page 28)

28
En
Sound Modes
ADVANCED THEATER mode (2/DTS
mode)
Switch on the Dolby/DTS mode by pressing the 2/DTS
button. When Dolby/DTS mode is on, Dolby Pro Logic,
Dolby Digital and DTS, and signal processing is per-
formed automatically corresponding to the input signal.
Use this button to cycle through the various modes.
When the STANDARD mode is selected, DSP modes are
off.
2 Switch the 2/DTS mode on and off by
pressing 2/DTS on the remote control or
2/DTS on the front panel.
Each press changes the display as follows.
*When using DTS 5.1/6.1 ch discs in STANDARD
mode the display will change to DTS-ES. Naturally
the playback will still be 6.1 output.(VSX-D810S)
Refer to page 25 for more details about each surround
effect.
Selecting a Sound Mode
To ensure the best possible surround sound, be sure to
complete the set up procedures described in “Setting Up
for Surround Sound” (starting on page 15) before using
the sound modes. This is particularly important when
using the 2 (Dolby) surround mode.
1 Press RCV .
This sets the remote to select the sound mode.
(You can skip this step when using the controls on
the receiver.)
2 Press DSP to select the sound mode.
Each press changes the DSP mode as follows:
MEMO:
• The amount of effect of each DSP mode can be
adjusted in the range of 10 to 90 (the default setting
value is 70) by pressing
EFFECT +/ –.
• The DSP effects can’t be heard in 5/6 CH STEREO
(VSX-D810S only).
• For VSX-D810S receiver, when the surround back
channel is set to off or SW, 6 channel stereo becomes
5 channel stereo.
2
EFFECT +/–
1
2
DISC
MPX
DISPLAY RF ATT
D.ACCESS
CLASS
ATT
BAND
/DTS DSP TEST TONE
CH SELECT CH LEVEL FUNCTION
SIGNAL SELECT
1 ¡ 4 ¢
7 8 3 ¶
EFFECT
DVD VCR CD-R TV
RCV TUN TVC CD
MIDNIGHT
LOUDNESS MUTING SETUP FL DIMMER
MULTI CONTROL
5.1 / 7.1
RECEIVER SOURCE
1 2 3
4 5 6
7 8
10
9
0
2
DISC
MPX
DISPLAY RF ATT
D.ACCESS
CLASS
ATT
BAND
/DTS DSP TEST TONE
CH SELECT CH LEVEL FUNCTION
SIGNAL SELECT
1 ¡ 4 ¢
7 8 3 ¶
EFFECT
DVD VCR CD-R TV
RCV TUN TVC CD
MIDNIGHT
LOUDNESS MUTING SETUP FL DIMMER
MULTI CONTROL
5.1 / 7.1
RECEIVER SOURCE
1 2 3
4 5 6
7 8
10
9
0
2
JAZZ DANCE HALL 1 HALL 2
THEATER 1 THEATER 2 5/6CH STEREO
(VSX-D810S only)
DRAMA STANDARD MUSICAL
ACTION EXPANDED
(VSX-D710S)
OFF
DRAMA * STANDARD
(VSX-D810S)
MUSICAL
ACTION 5/6-D THEATER OFF
Surround operation
MEMO:
• The effects of 2/DTS mode can be adjusted in the
range of 10 to 90 by pressing EFFECT +/ – (the default
setting is 70). Also, the effect level can be set in each
ADVANCED THEATER mode by pressing the
EFFECT +/ – button. The STANDARD mode cannot be
changed.
• For the VSX-D810S, when the surround back channel
is set to off in the speakers settings, 6-D Theater
becomes 5-D Theater.
1
1 Press RCV.