Pioneer DBR-TF100 - Manual (Page 25)

Using parental lock 06
25
4 Use the number buttons to input your
PIN.
5 Press 2/3 to switch between On and
Off. Go on to the next Locking/unlocking
channels below.
• If you enter the wrong PIN a message
is displayed and you cannot set Parental
Lock options.
Locking/unlocking channels
Channels must be locked/unlocked individu-
ally. Follow these steps to lock/unlock a
particular channel.
1 Press 5/∞ to select Channel Options
and press SELECT. The Channel Options
menu is displayed.
2 Press 5/∞ to select the channel to lock/
unlock. Press 2/3 to move to the lock box
(the box with the padlock icon over it). Press
SELECT to place/remove a check in the box
and lock/unlock the channel.
3 Repeat Step 2 to lock/unlock additional
channels.
4 Press MENU to complete the setting
and exit the menu.
• Enter your PIN if prompted.
Watching locked channels
When parental control is on and you select
a channel that is locked, a blank screen dis-
plays with a channel banner that says, “This
channel is locked. Press Red to unlock.”
1 Press the RED button. The PIN input
screen is displayed.
2 Use the number buttons to input your
PIN.
• If you unlock a channel in this way,
all channels are unlocked and remain
unlocked until the DTR again is put
in standby mode or a new channel is
locked.
En
gli
sh