Pioneer DBR-TF100 - Manual (Page 13)

02
13
Starting up the first time
Selecting aerial power
A message box appears on the screen
asking if your aerial is to be powered by the
DTR. Press
2/3 to select Yes or No and
press SELECT.
• Normally No is selected. Some optional
equipment aerials require power to be
supplied by the DTR. If you have such
an aerial, select
Yes. Refer to the user
manual for that product for further infor-
mation.
Scanning for channels
A message box is displayed, asking you to
confirm that your aerial is connected. After
you have confirmed your aerial connection,
press
SELECT. Your DTR will scan for chan-
nels and add all new channels found.
Scanning all channels will take a couple of
minutes.
• If no channels are found, a warning
message is displayed. Check your aerial
connection again. You can scan again by
selecting
Retry with 2/3 and pressing
SELECT.
Quick User Guide
At the end of the auto-setup process you are
asked if you want to see the Quick User Guide
explaining the main features of the DTR.
Press
2/3 to select Now or Later and press
SELECT.
If you select
Now you can view the Quick
User Guide for the DTR. Press SELECT to
pause the guide and to continue the guide
after a pause. To exit from the guide , press
MENU or EXIT.
If you select
Later or at the end of the Quick
User Guide, the channel with the lowest
number is displayed.
En
gli
sh