Pioneer DBR-TF100 - Manual (Page 24)

Using parental lock 06
24
4 Use the number buttons to input your
PIN (the default is 0000). The Set PIN menu
displays.
• If the PIN you input is not correct, an
invalid PIN message appears and you
are returned to the Setup menu.
5 Use the number buttons to input your
new, 4-digit PIN and confirm by entering the
PIN again.
• If you make a mistake, press 2 to back-
space and erase a digit.
• If the PIN number is confirmed the new
PIN is registered and you are returned to
the Setup menu.
• Press MENU to exit the Set PIN screen
without setting a new PIN.
• If you forget your PIN you can reset it to
the default of 0000 by restoring system
defaults. See Restore System Defaults
on page 36.
Turning parental lock on/off
When you turn parental control on, locked
channels’ programmes are not displayed un-
less the PIN is entered.
1 While viewing a programme, press
MENU. The HOME MENU is displayed.
2 Press 5/∞ to select Channel Manage-
ment and press SELECT. The Channel
Management menu is displayed.
3 Press 5/∞ to select Parental Lock and
press 2/3.