Advanced operation 05, Using the timer, En gli sh – Pioneer DBR-TF100 User Manual

Page 19

Advanced operation

gli

Using the timer

By using the timer you can have the DTR
turn on and a selected programme tuned in
automatically. Up to 10 timers can be set.

Displaying the timer menu

1 While viewing a programme, press

MENU. The HOME MENU is displayed.

2 Press

5/∞ to select Programme Timer

and press

SELECT. The Programme Timer

menu displays.

3 Input a new timer setting or move or
delete a setting. See Input timer settings,
below.

While using the on-screen Programme Guide
select a programme and press the

GREEN

button. A message is displayed asking if you
want to set a timer. Press

2/3 to select Yes

and press

SELECT. The Programme Timer

menu is displayed and all the information for
the selected programme is automatically en-
tered. Press

SELECT to set the programme.

Input timer settings

1 Press

5/∞ to select an available timer

slot and press

SELECT.

2 The present date is displayed. Press

5 to

select a date in the future. Press

∞ to select

a repeat interval. Press

3 to move to the

next item, Start time.

3 Enter the time the programme is to start.
Use the 24-hour clock for time settings, such
as 10:15 pm would be 2215.
Hour: Enter 22 by pressing the

number but-

tons or

5/∞. Press 3 to move to minutes.

Minute: Enter 15 by pressing the

number

buttons or

5/∞. Press 3 to move to the

next item, Stop time.

4 Enter the time the programme is to stop.
Press

3 to move to the next item, Channel.

5 Enter the channel to be set by using the

number buttons or

5/∞.

• If you make a mistake, press

2 to move

back to the previous item and correct
the setting.

8 Press SELECT to enter all the settings.

• If all entered setting are correct the

timer is saved.

• If an invalid setting was entered, a warn-

ing is displayed. Correct the setting info.