Pioneer DJM-800 - Manual (Page 19)

19
En
English
MIDI SETTINGS
MIDI SETTINGS
MIDI is an acronym for “Musical Instrument Digital Interface” and
refers to a protocol developed for the exchange of data between
electronic instruments and computers.
A MIDI cable is used to connect components equipped with MIDI
connectors to enable the transmission and receipt of data.
The DJM-800 uses the MIDI protocol for transmitting and receiving
data about component operation and BPM (timing clock).
MIDI START
/STOP
TIME
MIDI OUT
DJM-800
OUT
BPM
=120
BPM
=120
IN
IN
DJ CD Player
MIDI sequencer
Audio
1. Use a commercially available MIDI cable to connect the
DJM-800’s MIDI OUT connector to the MIDI sequencer’s
MIDI IN connector.
¶ Set the MIDI sequencer’s synch mode to “Slave”.
¶ MIDI sequencers that do not support MIDI timing clock cannot
be synchronized.
¶ Synch may not be achieved if the track’s BPM cannot be
detected and measured stably.
¶ BPM values set with the TAP mode can also be used to output
the timing clock.
2. Press the MIDI START/STOP button.
¶ The MIDI timing clock output range is 40 to 250 BPM.
Note:
¶ Accurate measuring of BPM may be impossible with some tracks.
[MIDI Channel Setting]
The MIDI channel (1 to 16) can be set and stored in memory.
1. While holding the MIDI START/STOP button depressed,
set the power switch to ON.
¶ The display will show [MIDI CH SETTING] and the unit will
enter the MIDI setting mode.
2. Rotate the TIME dial to select the MIDI channel.
3. Press the MIDI START/STOP button.
¶ The selected MIDI channel will be recorded.
4. Set power to OFF.
MIDI MESSAGES
SYNCHRONIZING AUDIO SIGNALS
TO EXTERNAL SEQUENCER, OR
USING DJM-800 INFORMATION TO
OPERATE AN EXTERNAL
SEQUENCER
CH1
CH2
CH3
TRIM
HI
MID
LOW
COLOR
CUE
FADER
CF ASSIGN
TRIM
HI
MID
LOW
COLOR
CUE
FADER
CF ASSIGN
TRIM
HI
MID
LOW
COLOR
CUE
FADER
CF ASSIGN
VR
VR
VR
VR
VR
BUTTON
VR
SW
VR
VR
VR
VR
VR
BUTTON
VR
SW
VR
VR
VR
VR
VR
BUTTON
VR
SW
Bn 01 dd
Bn 02 dd
Bn 03 dd
Bn 04 dd
Bn 05 dd
Bn 46 dd
Bn 11 dd
Bn 41 dd
Bn 06 dd
Bn 07 dd
Bn 08 dd
Bn 09 dd
Bn 0A dd
Bn 47 dd
Bn 12 dd
Bn 42 dd
Bn 0C dd
Bn 0E dd
Bn 0F dd
Bn 15 dd
Bn 16 dd
Bn 48 dd
Bn 13 dd
Bn 43 dd
0 to 127
0 to 127
0 to 127
0 to 127
0 to 127
OFF=0, ON=127
0 to 127
0, 64, 127
0 to 127
0 to 127
0 to 127
0 to 127
0 to 127
OFF=0, ON=127
0 to 127
0, 64, 127
0 to 127
0 to 127
0 to 127
0 to 127
0 to 127
OFF=0, ON=127
0 to 127
0, 64, 127
Category Switch Name Switch Type
MIDI Message
Comments
MSB LSB