Brother FAX-921 - Manual (Page 136)

V - 43
WSW30 (Function setting 8)
Selector
No.
Function Setting and Specifications
1
|
3
Detection level of dial tone or
busy tone for the built-in TAD
operation
No. 1 2 3
0 0 0
: -38.0 dBm (A)
0 0 1 : -39.5 dBm (B)
0 1 0 : -41.0 dBm (C)
0 1 1 : -42.5 dBm (D)
1 0 0 : -44.0 dBm (E)
1 0 1 : -45.5 dBm (F)
1 1 0 : -47.0 dBm (G)
1 1 1 : -48.5 dBm (H)
4
|
6
Not used.
7
8
Recording intensity control
No. 7 8
0 0 : A
0 1 : B
1 0 : C
1 1 : D
NOTE: Selectors 1 through 3 are applicable to those models equipped with a built-in TAD.
l l Selectors 1 through 3: Detection level of dial tone or busy tone for built-in TAD operation
If dial tone or busy tone inputted during ICM recording is below the level specified by these
selectors, the TAD stops recording and disconnects the line.
l l Selectors 7 and 8 Recording intensity control