BT EQUINOX 1350 - Manual (Page 82)

BT Equinox 1350 – Edition 4.1 – 27.09.05 – 6576
If you experience any problems, please call the Helpline on 0870 605 8047
Use your phone as an alarm clock.
Set the date and time and use your BT Equinox 1350 to
give you a reminder alarm.
You can have a different alarm setting for each handset
registered to your base. The alarm rings only at the
handset, not at the base or any other handset.
Set alarm
1. Press MENU then scroll to Time settings and press
OK . Press OK to select Alarm .
2. Press OK to select On/Off . Scroll or to highlight
the option you want:
On Once – alarm goes off just once.
On Daily – alarm goes off same time each day.
Off – alarm off.
Press OK to confirm.
3. If you are setting an alarm, the screen shows
Time . Enter the time you want the alarm to go off in 24
hour clock mode, e.g. for 7.30am,
then press OK to confirm.
IMPORTANT
If you have subscribed to your
network’s Caller Display service the
date and time will be set
automatically when you receive
your first call and you will not need
to set the date and time manually,
although this is an option.
When the alarm is switched on, the
standby icon shows the
icon
Time settings
82