BT EQUINOX 1350 - Manual (Page 23)

Ring / Page a specific handset from the base:
1. If you know the handset number, press and release
on the base. Use the keypad to enter the
handset number you want (i.e. 1).
2. The handset will ring and display Internal Call Handset
X (where X is the handset number).
3. Press on the handset. You can now talk to each other.
Handset keypad lock
You can lock the keypad to prevent accidental dialling
while carrying the handset around.
1. Press and hold until the screen shows Keypad
Locked and the appears.
2. Press Unlock then YES to use the keypad again.
Internal calls
You can make internal calls between the base and any
registered handsets.
Call another handset or base
1. Press on the handset or on the base then
enter the handset number or for the base.
1 2
0
4
8
5
7
3
6
9
Intercom Names
Intercom Names
23 Using the phone
You cannot make any calls,
including 999 and 112 emergency
calls while the keypad is locked.
Answer incoming calls by pressing
as normal.
BT Equinox 1350 – Edition 4.1 – 27.09.05 – 6576
If you experience any problems, please call the Helpline on 0870 605 8047
The handset number is shown on
the handset standby screen i.e.
Equinox 1. The base number is 0.