BT EQUINOX 1350 - Manual (Page 16)

Navigating the handset menu
Your BT Equinox 1350 has a handset menu system
which is easy to use. Each menu leads to a list of
options. The menu map is shown on the following page.
When the handset is switched on and in standby, press
the option button under
MENU to open the main menu.
Press the or button to scroll to the menu option
you want. Then press OK to select further options or
confirm the setting displayed.
For example to change the handset ringer volume:
1. Press MENU then scroll to Personalise and press OK .
2. Press OK to select Handset , scroll to Ring Volume
then press OK .
3. The current setting is displayed. Press to increase or
to decrease the volume, the ringtone is played at each
level you select. Press OK to confirm.
Exit or go back one level in the handset menu
To the previous level in the menu, press BACK .
To cancel and return to standby at any time, press .
If no button is pressed for 60 seconds, the handset
returns to standby automatically.
16 Getting to know your phone
BT Equinox 1350 – Edition 4.1 – 27.09.05 – 6576
If you experience any problems, please call the Helpline on 0870 605 8047
Select the option displayed by
pressing the button underneath it.
For example, select Names by
pressing the option button below it.