Olympus TG810 - Manual (Page 48)

48 EN
For information on using the menus, see “Setup menu” (p. 6).
Erasing images [Erase] Erasing images [Erase]
q (Playback menu) X Erase
Submenu 2 Application
All Erase
All images in the internal memory or
card will be erased.
Sel. Image
Images are individually selected and
erased.
Erase Deletes the image displayed.
When erasing pictures in the internal memory, do not
insert the card into the camera.
Before erasing pictures from a memory card, insert
the card into the camera.
Protected images cannot be erased.
To individually select and erase images To individually select and erase images
[Sel. Image]
[Sel. Image]
1 Use FG to select [Sel. Image], and press the A button.
2 Use HI to select the image to be erased, and press
the A button to add a R mark to the image.
Press the W zoom button to display an index
view. Images can be quickly selected using the
FGHI buttons. Press the T button to return to
the single frame display.
R mark
MENU OK
Sel. Image
Erase/Cancel
5/30 5/30
3 Repeat Step 2 to select the images to be erased, and
then press the m button to erase the selected images.
4 Use FG to select [Yes], and press the A button.
The images with a R mark are erased.
●
●
To erase all images [All Erase] To erase all images [All Erase]
1 Use FG to select [All Erase], and press the A button.
2 Use FG to select [Yes], and press the A button.
Saving print settings to the image data Saving print settings to the image data
[Print Order]
[Print Order]
q (Playback menu) X Print Order
“Print Reservations (DPOF)” (p. 61)
Print reservation can be set only for still images that
are recorded to the card.
Protecting images [ Protecting images [R R]]
q (Playback menu) X R
Protected images cannot be erased by [Erase] (p. 25,
48), [Sel. Image] (p. 48), or [All Erase] (p. 48), but
all images are erased by [Memory Format]/[Format]
(p. 49).
1 Use HI to select an image.
2 Press the A button.
Press the A button again to cancel the settings.
3 If necessary, repeat Steps 1 and 2 to protect other
images, and press the m button.
Rotating images [ Rotating images [y y]]
q (Playback menu) X y
1 Use HI to select an image.
2 Press the A button to rotate the image.
3 If necessary, repeat Steps 1 and 2 to make settings
for other images, and press the m button.
The new picture orientations will be saved even after
the power is turned off.
●