Olympus TG810 - Manual (Page 32)

32 EN
When set to [Auto] or [Manual], [Image Size]
(p. 40) is fi xed to [2].
The focus, exposure, zoom position (p. 22), and white
balance (p. 37) are locked at the fi rst frame.
The fl ash (p. 35) is fi xed to $ (Flash Off) mode.
Taking pictures with [Auto] Taking pictures with [Auto]
1 Press the shutter button to take the fi rst frame.
2 Move the camera slightly in the direction of the second
frame.
Target mark
Pointer
Screen when combining images
from left to right
AUTO AUTO
MENU OK Save Cancel
3 Move the camera slowly while keeping it straight, and
stop the camera where the pointer and target mark
overlap.
The camera releases the shutter automatically.
AUTO AUTO
OK MENU Save Cancel
To combine only two pictures, press the A button
before taking a third frame.
4 Repeat Step 3 to take a third frame.
After the third frame is taken, the camera
automatically processes the frames and the
combined panorama image is displayed.
●
●
To exit the panorama function without saving an
image, press the m button.
If the shutter does not automatically release, try
[Manual] or [PC].
Taking pictures with [Manual] Taking pictures with [Manual]
1 Use HI to specify at which edge the next picture is
to be connected.
Direction for
combining the next
frame
MANUAL
OK Set
MANUAL
2 Press the shutter button to take the fi rst frame.
1st frame
MANUAL MANUAL MANUAL MANUAL
1 2 1 2
MENU OK Save Cancel
Joint areas
3 Compose the next shot so that joint area 1 overlaps
joint area 2.
Composition of the 2nd frame
1 2 1 2
MENU OK Save Cancel
MANUAL MANUAL