Brother FAX 375MC - Manual (Page 83)

69
M E S S A G E C E N T E R
Changing Fax Forwarding Number
You can change the default setting of your fax forwarding number from a
remote telephone or fax machine using touch tone.
1 Dial your fax machine number.
2 When you hear the beep, immediately enter your Remote Retrieval
Access Code (
1 5 9 ).
3 When you hear two short beeps, use the dial pad to press 9 5 4 .
4 Enter the new number of the remote fax machine where you want your
fax messages forwarded, and then press
.
You cannot use and as dial numbers. However, if you want to
store a pause, press .
5 To retrieve the Memory Status List, when you hear two short beeps, use
the dial pad to press 9 6 1 .
6 Use the dial pad to enter the number of the remote fax machine (up to
20 digits), and then press
.
7 After you hear your fax machine beep, hang up and wait.
Your fax machine calls the remote fax machine. The remote fax
machine prints the Memory Status List showing the new forwarding
number.
8 Check the forwarding number.
If the forwarding number is incorrect, return to Step 1 to reset it.