Setting the speaker volume – Brother FAX 375MC User Manual

Page 42

C H A P T E R F O U R

Setting Volume Amplify

Please carefully read “Setting the Handset Volume” before you do the
following steps:

Press

Function

SELECT <- -> & SET

VOL AMPLIFY:OFF?

Press

to select VOL AMPLIFY:OFF? if none of the

users are hearing-impaired and go to Step 4—OR—If some or all of the
users are hearing-impaired, select VOL AMPLIFY:ON?.

SELECT <- -> & SET

PERMANENT?

Press

to select PERMANENT? if all the users are

hearing-impaired—OR—Select TEMPORARY? if only some of the
users are hearing-impaired.

Press

Set

Press

Stop

to exit.

Setting the Speaker Volume

You can adjust the speaker volume when your fax machine is onhook (after
you pressed

Speaker Phone

), by selecting a speaker volume level.

Press

to adjust the volume level. The display shows the setting

you are choosing. Each key press changes the volume to the next setting.
The new setting will remain until you change it again.

You can adjust the speaker volume while you are listening to your OGM
(Outgoing Message) and ICMs (incoming messages).

If you turn the Incoming Recording Monitor to OFF (

Function

), the

Speaker for screening calls will be disabled and you will not be able to hear
callers leaving messages. The volume for other operations can still be
controlled using

and