Chapter 7 troubleshooting, Alarm indications at a glance, Operator calls for the printing function – Brother HL-P2000 User Manual
Page 53: Alarm indications at a glance 7-1, Operator calls for the printing function 7-1, Troubleshooting – chapter 7, Operator calls” in chapter 7, See “alarm indications at a glance, In chapter 7, And take corrective action for the error
CHAPTER 7 TROUBLESHOOTING
7-1
CHAPTER 7
TROUBLESHOOTING
ALARM INDICATIONS AT A GLANCE
Operator Calls for the Printing Function
If a recoverable error occurs, the machine indicates an ‘operator call’ by
blinking the
Alarm
lamp and any of the following lamps.
Find the error and take the proper action to correct it. The machine
automatically recovers from most errors, but you may need to reset the
machine with the panel switch as described below.
Blinking Lamp Error Action
Paper
❍↔●
Alarm
❍↔●
Paper jam Clear the paper jam referring to the next section
and press the panel
switch
if
the machine does not automatically resume
printing.
Paper empty Load paper in the machine referring to
and press the panel
switch
.
Misfeed Reinstall the paper and press the panel
switch
.
Toner
❍↔●
Alarm
❍↔●
(every 5 seconds)
Toner low Indicates that the machine has approximately 100
pages of printing left before the toner cartridge is
empty. Prepare a new toner cartridge.
Toner
❍↔●
Alarm
❍↔●
(Fast blinking)
Toner Empty Replace the toner cartridge with a new one
referring to