Brother HL-P2000 User Manual

Page 39

Text mode
Original mode

USER’S GUIDE

6–4

3. Remove the old toner cartridge from the drum unit by pulling it out

gently.

Fig. 6-5 Removing the Old Toner Cartridge

Caution

Handle the toner cartridge carefully. If toner scatters on your hands or
clothes, wipe or wash it off with cold water immediately.

4. Unpack the new toner cartridge, gently shake it five or six times and

then remove the protective part.

Caution

Only unpack the toner cartridge immediately before installing it into

the machine. If toner cartridges are left unpacked for a long period of
time, the toner life is shortened.

You can only use a Brother genuine toner cartridge (TN-300

series) which is specially formulated to ensure top print quality.
Damage caused by using toner cartridges other than those
supplied by Brother is not covered under any warranty or service
agreement.

Fig. 6-6 Shaking the Toner Cartridge

and Remove the Protective Part