Brother HL-P2000 - Manual (Page 52)

CHAPTER 6 MAINTENANCE
6–17
4. Place the drum unit assembly in the plastic bag and seal the bag
completely.
Fig. 6-26 Placing the Drum Unit in the Plastic Bag
5. Close the top cover, the extension wire, and the output tray.
6. Remove the document support from the machine.
7. Wrap the machine in the plastic bag and place it in the original carton
box with the original Styrofoam packing material.
8. Place any documents (manual and any documentation describing the
reason for repacking the machine) and the drum unit assembly in the
carton box as shown below.
9. Close the carton box and tape it.
Fig. 6-27 Repacking the Machine
Drum Unit
Including Toner
Cartridge
Carton
Printer
Manuals