Brother HL-P2000 - Manual (Page 46)

CHAPTER 6 MAINTENANCE
6–11
CLEANING THE MACHINE
Clean the machine exterior and interior periodically. If printed pages get
stained with toner, clean the machine interior and drum unit.
Cleaning the Machine Exterior
Clean the machine exterior as follows:
1. Turn off the power switch and unplug the power cord.
Warning
There are high voltage electrodes inside the machine. Before cleaning
the machine, make sure to turn off the power switch and unplug the
power cord from the power outlet
Fig. 6-19 Turning off the Switch and Unplugging
2. Remove the paper in the multi-purpose sheet feeder.
3. Use a damp cloth for cleaning.
!
Caution
Use water or neutral detergents for cleaning. Cleaning with volatile
liquids such as thinners or benzene will damage the surface of the
machine.
4. Wipe dirt and dust away from the machine exterior and feeder with a
cloth.
5. Load paper into the multi-purpose sheet feeder, and plug in the power
cord.