Brother HL-P2000 - Manual (Page 30)

USER’S GUIDE
4-2
Photo/Text
Select the copy mode from Text or Photo
1. Insert the original document face down in the Document Feeder.
2. Press the Photo button to select photo mode.
When you select Photo mode, the Photo lamp comes on.
3 . Press the Copy button to start copying.
Enlarge/Reduce
You can make an enlarged or reduced size of copy from 50% to 150%
(for USA and Canada), 50% to 200% (for other countries).
1. Insert the original document face down in the Document Feeder.
2. Press the Enlarge/Reduce button and select the Enlarge/Reduce
ratio.
* You can reduce to 78 or 50% of the original size.
---- OR ----
* You can enlarge to 120% or 150%
* You can reduce to 71 or 50% of the original size.
---- OR ----
* You can enlarge to 141% or 200%
When Enlarge/Reduce is 100%, all the LEDs are off.
3. Press the Copy button to start the copy.
✒ Note
If the enlarged size is bigger than the copy paper, you may lose some
portion of the original document. In that case, reduce the enlargement
ratio.