Avaya 3701 - Manual (Page 23)

Calling
Issue 3 October 2008 23
Making a Call
Please note: In pre-dialling, if the input cursor is positioned behind the telephone number, the
number to be chained will be suffixed to that telephone number. If the input cursor is at any
other point, the number to be chained will be prefixed to the telephone number.
Correcting an entry during pre-dialling:
: deleting individual digits; press for a longer period: deletes the whole phone number.
Notes:
z
Long key press on “ * “ inserts “ ” (note-key) in the pre-dial-mode. For security reasons
any digit entered after the note-key will not be stored in the Redial list (like PIN code).
z
Long key press on “0“ inserts P (for pause) in the pre-dial-mode. (The 1.5 second Pause is
only supported by IP DECT system.)
Making a Call from the Last Number Redial List
Dialing:
Press or and dial the phone number.
Pre-dialling:
Enter the phone number and press or . You
can use pre-dialling to chain telephone numbers from
different lists. Press Options, select one of the lists
with the arrow keys and OK. Select a telephone
number from the list. A long press on the hook key
will add the number to the number predialed before.
Selection: press the -softkey and then one of the
arrow keys (several times if necessary) with the
telephone in an idle state. The last 10 phone
numbers dialed are then displayed. The beginning /
end of the number redial list is marked by a dashed
line.