Xerox WorkCentre M123-M128-3048 - Manual (Page 28)

System Controls
Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 Quick Reference Guide 27
System Controls
The following diagram shows the names and functions of the buttons on the control
panel.
Button Function
1 Displays the log-in screen to enter the [System Administrator
Menu] screen, or when the Authentication feature is enabled. DO
NOT press this button again, after you have logged in. This will log
you out immediately.
2 This button is non-functional on this machine.
3 Changes the languages displayed on the touch screen.
NOTE: Certain characters may be garbled when you change
languages.
4
(green light) Indicates whether the machine is in power saver mode. Also
cancels Low Power Mode or Sleep Mode.
5 Resets to the default settings and displays the first screen for the
current pathway.
6 Temporarily interrupts a job for programming a priority job.
7 Suspends or cancels a job depending on the job type. When
multiple jobs are being processed, all the jobs will be suspended or
cancelled. Selecting [Stop] on the [Job Status] screen stops only
the selected job.
8 Starts or resumes a job.
9 Enters speed dial codes.
10 Deletes a numeric value or the last digit entered, and replaces the
current value with a default value. Also cancels suspended jobs.
11 Inserts a pause while dialing a fax number.
1 2
5
8
9 10 11
12
13
6
7
3 4