Figure 71: dmz settings, Figure 72: firewall > dmz – Allied Telesis AT-WR2304N User Manual

Page 51

Text mode
Original mode

AT-WR2304N IEEE 802.11 b/g/n, Small Business Wireless Router User Manual

Figure 71: DMZ Settings

3. Input the “IP Address” and “MAC Address”, and then click on “Add”. Apply the setting.
4. Go to “Firewall” Æ “DMZ”. Select the PC from “Please select a PC”, and then click on “<“ to

add it to “Local IP Address”.

Figure 72: Firewall > DMZ

5. Check “Enable DMZ” to apply the change.

Note: To enable DMZ might make computer suffer from hacker attacks. Please use only when

necessary. You must apply static IP on the Client PC.