Figure 53: wds security settings (ap1), Figure 54: wds settings (ap2), Figure 55: wds site survey – Allied Telesis AT-WR2304N User Manual
Page 43
AT-WR2304N IEEE 802.11 b/g/n, Small Business Wireless Router User Manual
33
Figure 53: WDS Security Settings (AP1)
6. Click on “Apply” to save the settings.
AP2
Please set AP2 according to the following procedure.
1. Un-plug the cable connecting the PC and AP1, and connect it to AP2.
2. In management configuration menu, check top-right side and make sure the equipment is at
“Repeater Mode”. You might need to wait for rebooting after this setting.
3. Go to “Wireless” Æ “Basic”, Click on “Site Survey”.
Figure 54: WDS Settings (AP2)
4. Find and select AP1 SSID. Click on “Connect” to set encryption configuration.
Figure 55: WDS Site survey
5. Set encryption according to AP1’s wireless setting. Click on “Apply”.
See also other documents in the category Allied Telesis Hardware:
- AT-9800 (110 pages)
- AT-2750TX- (2 pages)
- AT-2701FTX (2 pages)
- AT-2451FTX (238 pages)
- AT-WA1104G-10 (99 pages)
- AlliedWare AR440S (53 pages)
- CG-WLBARGS (58 pages)
- AT A35/SX AT-A35-SX/SC (2 pages)
- AT-2750FX/ (2 pages)
- 86222-10 (14 pages)
- AR44x (22 pages)
- CG-WLBARGMO (56 pages)
- AT 2916T AT-2916T (2 pages)
- RG6x4 Series (3 pages)
- AR441S (6 pages)
- AT-2931SX (76 pages)
- AT-2931SX (144 pages)
- AT-2916SX (74 pages)
- AT-2931SX (140 pages)
- AT-2931SX (18 pages)
- AT-2931SX (136 pages)
- AT-AR236E (36 pages)
- AT-AR236E (19 pages)
- 86241-01 (4 pages)
- MiniMAP 9100 (2 pages)
- POTS24 (2 pages)
- 86241-02 (12 pages)
- AT WCP201G AT-WCP201G-001 (2 pages)
- 86251-05 (40 pages)
- ADSL48 (2 pages)
- 210 (8 pages)
- R800 Series (30 pages)
- NETEXTREME II AT-2973T/4 (176 pages)
- AT-AR750S-dp (5 pages)
- Routers and Switches (15 pages)
- AT-AR300 (36 pages)
- AT AR750S AT-AR750S (5 pages)
- AT-AR441S (5 pages)
- AT-2916SX/ (2 pages)
- 7112 (2 pages)
- AT-WA1004G (142 pages)
- AlliedWare NetScreen Routers (12 pages)
- AT-27xx (3 pages)
- AT-WR4500 (264 pages)