Allied Telesis AT-WR2304N - Manual (Page 32)

22 AT-WR2304N - IEEE 802.11 b/g/n, Small Business Wireless Router - User Manual
Figure 33: WPA RADUS Encryption
2. Configure the parameter.
) SSID Selection: If you enable more than one SSID, select here to configure.
) Broadcast SSID: Enable or disable SSID broadcast. The default value is “Enable”.
) WMM: Enable or disable WMM function. The default value is “Enable”.
) Encryption: Select “WPA RADIUS”.
) WPA Type:
WPA (TKIP): WPA is the first generation of WPA encryption technology. Select it if your
wireless adapter does not support the latest standard.
WPA2 (AES): WPA2 use more rigorous encryption then WPA. Please make sure that the
wireless adapter is compatible with the encryption, or please select “WPA2 Mixed”.
WPA2 Mixed: The equipment detects connected wireless adapter and automatically switch
between WPA and WPA2. It is recommended using this setting.
) RADIUS Server IP Address: Please contact your IT administrator for the value.
) RADIUS Server Port: Please contact your IT administrator for the value.
) RADIUS Server Password: Please contact your IT administrator for the value.
3. Click on “Apply” to save the settings.
Note: To make connection successful, You must configure the wireless adapter the same
setting with the wireless router.