Allied Telesis AT-WR2304N - Manual (Page 45)

AT-WR2304N IEEE 802.11 b/g/n, Small Business Wireless Router User Manual 35
Figure 58: Wireless > Filter
) Enable Wireless Access Control: Check the box to enable this function.
) Description: Specify a description for identification.
) MAC Address: Input the MAC address you want to allow. The format is “xxxxxxxxxx”.
) MAC Address Filtering Table: All authorized MAC address filtering rules are listed here.
Figure 59: MAC Address Filter Table
Note: You can remove a rule by checking the item and clicking on “Delete Selected”, or click on
“Delete All” to remove all rules.
WPS
Wi-fi Protected Setup (WPS) provides an easy way to connect to a secured AP. To perform WPS, make sure
that the wireless adapter supports WPS feature. There are 3 ways to perform the setting.
Note: The configuration and terminology in wireless adapter utility maybe dissimilar in different
models.
Push button connection provides a simplest way to build a connection. It is recommended using this way.
1. Push the WPS button on AT-WR2304N IEEE 802.11 b/g/n, Small Business Wireless Router. The
wireless/WPS LED should blink quickly.