Xerox DocuColor 240-250 con Xerox FreeFlow DXP250-14668 - Manual (Page 4)

DocuSP Remote Services
Setup Guide
Version 50.XX
2
Figure 3 - DNS Setup Window
If a different Name Service is used, select the corresponding tab and enter
the information supplied with the Installation Worksheet.
__6. Log into DocuSP Diagnostics, and enter dC105 System Configuration
Setup. Ensure that the information required for Remote Services to
function properly has been entered (Figure 4).
Figure 4 - dC105 System Configuration Setup
Product Code: All alpha characters must be entered as UPPERCASE.
Examples: PYW (NASG) 112 (XE/DMO)
Printer (Print Engine) Serial Number: Product Code must be appended to the front
of the Serial Number. Do not enter spaces or dashes.
Examples: PYW123456 (NASG) 1121234567 (XE/DMO)
Note
For systems with a touch screen UI on the IOT, enter dC105 at the IOT UI
and verify the product code and serial number.
__7. Exit DocuSP Diagnostics.
IMPORTANT!
For internal Xerox locations (e.g., training centers, customer support
centers), go to Appendix A, Configuring Remote Services at Xerox
Sites at this time. Do not continue with the next section until Appendix
A has been completed.
[Enable DNS] is checked
Domain Name
DNS Server List
Printer Serial Number
Customer
Phone Number
Customer
Name & Address
Product Code