Making advanced copies, Setting 2in1 copying, Setting duplex (2-sided) copying – Konica Minolta Magicolor 2480MF User Manual
Page 81: Making advanced copies 69
Making Advanced Copies
69
Making Advanced Copies
This section contains descriptions of setting 2in1 copying, duplex (2-sided)
copying, and collated copying.
"
2in1 copying, duplex (2-sided) copying and collated copying cannot be
combined.
Setting 2in1 Copying
If 2in1 copying is set, two document pages can be copied together onto a sin-
gle page.
"
With 2in1 copying, load the document into the ADF. 2in1 copying can-
not be performed by using the original glass.
1
Press the 2in1 key.
The zoom ratio is set to
0.70
on 220 V models and
0.64
on 110 V mod-
els, and
appears in the display.
"
The zoom ratio can be changed when 2in1 copying is set.
Setting Duplex (2-Sided) Copying
If duplex (2-sided) copying is set, copies can be printed on both sides of the
media.
"
The duplex option must be installed in order to set duplex (2-sided)
copying.
1
Press the Function key three times.
A screen appears, allowing duplex (2-sided) copying to be set.
"
This screen appears only if the duplex option is installed.
2
Press the
or
key to select ON, and then press the Menu/Select key.
3
Press the Cancel/C key.
The main screen appears again, and
appears in the display.
"
When making double-sided copies in full color, printing will begin 30 to
50 seconds after scanning of the document is finished.