Konica Minolta Magicolor 2480MF - Manual (Page 151)

Solving Problems with Printing Quality 139
Irregular
print or mot-
tled image
appears. The media is moist
from humidity. Adjust the humidity in the media stor-
age area.
Remove the moist media and replace it
with new, dry media.
Unsupported media
(wrong size, thick-
ness, type, etc.) is
being used. Use KONICA MINOLTA-approved
media. See “Specifications” on page
24.
Also, refer to printer. konicaminolta.
com for a complete list of currently
approved media.
One or more of the
toner cartridges may
be defective. Remove the toner cartridges and
check for damage. If it is damaged,
replace it.
The drum cartridge is
defective. Remove the drum cartridge and check
for damage. If it is damaged, replace it.
The fuser separator
levers are adjusted
for envelope printing. Return the fuse separator levers to the
plain paper setting.
There is
insufficient
fusing or the
image
comes off
when
rubbed. The media is moist
from humidity. Remove the moist media and replace it
with new, dry media.
Unsupported media
(wrong size, thick-
ness, type, etc.) is
being used. Use KONICA MINOLTA-approved
media. See “Specifications” on page
24.
Also, refer to printer. konicaminolta.
com for a complete list of currently
approved media.
Media type is set
incorrectly. When printing envelopes, labels, post-
cards, card stock, or transparencies,
specify the appropriate media type in
the printer driver.
The fuser separator
levers are adjusted
for envelope printing. Return the fuse separator levers to the
plain paper setting.
Symptom Cause Solution