Konica Minolta Magicolor 2480MF - Manual (Page 159)

Status, Error, and Service Messages 147
MEDIA TYPE ERROR
(Displaying alternately)
REFILL
XX
The type of the media
loaded in the media
tray is incorrect. Load the correct
media type in Tray 1.
MEM. OVERFLOW ERROR
The machine has
received more data
than can be pro-
cessed with its inter-
nal memory. Turn the machine off,
and then, after a few
seconds, turn it on
again. Decrease the
amount of data to be
printed (for example,
by decreasing the
resolution), and then
try printing again.
ORIGINAL DOC. JAM
(Displaying alternately)
OPEN ADF FEED COVER
Media has misfed in
the ADF. Locate and remove
the misfeed.
OUTPUT BIN FULL
(Displaying alternately)
REMOVE PAPER
The output bin is full
of media. Remove all media
from the output bin.
PAPER MISFEED
(Displaying alternately)
OPEN FRONT COVER
Media has misfed
while being pulled
from the tray. Locate and remove
the misfeed.
PAPER SIZE ERROR
(Displaying alternately)
REFILL
XX
The size of the media
loaded in the media
tray is incorrect. Load the correct
media size in the
specified tray.
SCANNER UNIT OPEN
(Displaying alternately)
CLOSE SCANNER UNIT
Open the scanner
unit. Close the scanner
unit.
SIZE/TYPE ERROR
Unsupported media
(wrong size, thick-
ness, type, etc.) is
being used. Load the correct
media size and type.
This message... means... do this...