Konica Minolta Magicolor 2480MF - Manual (Page 23)

About the Control Panel 11
6 Function key Press to specify the tray setting and the duplex
(2-sided) setting for copying.
"
The settings can be specified when the
optional media feed unit and duplex option are
installed.
7 2in1 key Press to specify 2in1 copying.
8 Collate key Press to specify collated copying.
9 Quality key Press to specify the document type to be copied and
the resolution.
10 Reduce/
Enlarge key Press to specify reduced/enlarged copying with pre-
set zoom ratios.
11 Light/Dark key Press to select the copy density.
12
/ keys
„ Press to move left and right through the setting
screens, such as the configuration menu.
„ Press to select the copy density.
13 +/- keys „ Press to move up and down through the setting
screens, such as the configuration menu.
„ Press to specify the zoom ratio in 0.01 incre-
ments. (Setting range: 0.50 to 2.00)
14 Menu Select
key „ Press to display the configuration menu.
„ Press to select the setting that is currently dis-
played.
15 Cancel/C key „ Press to cancel the setting that is currently dis-
played.
„ Press to clear the specified number of copies.
„ Press to return to the main screen from a setting
screen.
16 TC Change key Press to display the message for replacing the toner
cartridge. For details on replacing the toner car-
tridge, refer to “Replacing the Toner Cartridge” on
page 80.
17 Start-Color key Press to begin full-color copying.
18 Start indicator Lights up in green when copying is possible.
Lights up in orange if copying is not possible, for
example, during warm-up or if an error has occurred.
No. Name Function