Konica Minolta Magicolor 2480MF - Manual (Page 45)

Print Media 33
Media Storage
„ Keep media on a flat, level surface in its original wrapper until it is time to
load it.
Media that has been stored for a long time out of its packaging may dry up
too much and cause misfeeding.
„ If media has been removed from its wrapper, place it in its original pack-
aging and store in a cool, dark place on a level surface.
„ Avoid moisture, excessive humidity, direct sunlight, excessive heat (above
35°C [95°F]), and dust
„ Avoid leaning against other objects or placing it in an upright position.
Before using stored media, do a trial print and check print quality.
Output Bin
All printed media is output to the face-down output bin. This tray has a capac-
ity of approximately 100 sheets (A4/Letter) of 80 g/m
2 (22 lb) media.
"
If the media is stacked too high in the output bin, your machine may
experience media misfeeds, excessive media curl, or static buildup.
"
Remove transparencies as soon as possible from the output bin to
avoid static buildup.
The output bin can be adjusted to
two angles, as shown in the illustra-
tion at the right.