Konica Minolta bizhub 601 - Manual (Page 189)

751/601 1-176
Setup items by operation 1
When "SMB" was selected using [Registration]
Simplex/Duplex Specify whether the original is 2-sided.
Original Type Specify the quality of the original, such as text or photo.
Separate Scan Specify whether to divide scanning of the original.
Density Specify the density.
Background Removal Adjust the density of the background.
Scan Size Specify the original size ("Auto", "Standard Size" or "Custom Size").
If "Standard Size" is selected, select the size and the feed direction. If "Custom Size" is
selected, specify the height and width.
Application Setting Click the [Display] button, and then specify settings for the functions that are displayed.
E-mail Notification Specify whether to send notification of scan data URL. Specify the notification address
for "Address". To select a destination from the list, click [Search from List].
Original Direction Specify the original orientation.
2-Sided Binding Direc-
tion Specify the binding orientation of the original.
Special Original Specify the original in a different size.
Book Scan Specify whether to perform book scan.
Erase Specify whether to perform frame erase.
Full Image Area Specify whether to scan the entire page of the original.
Neg./Pos. Reverse A setting is made to decide whether or not a reversal is made between the white section
and the black section in the original.
Compose
(Date/Time) Specify whether to print the date/time.
If yes, specify settings for "Date Type", "Time Type", "Print Position", "Fine-Tune", "Pag-
es", and "Size".
Compose
(Page) Specify whether to print page numbers.
If yes, specify settings for "Page Number", "Chapter", "Print Position", "Fine-Tune", and
"Size".
Compose
(Header/Footer) Specify whether to print a header/footer. If yes, specify the registration number of the
header/footer. To check the registered header/footer, click [Confirm Registered Con-
tents].
Compose
(Stamp) Specify whether to print the stamp.
If yes, specify settings for "Preset Stamp" or "Registered Stamp", "Print Position", "Fine-
Tune", "Pages", and "Size". To check the registered stamp, click [Confirm Registered
Contents]. To use the registered stamp function, stamps must be registered from the con-
trol panel in advance.
Stamp Combine Method Specify the stamp composition method.
Limiting Access to Desti-
nations Click [Display], and then specify the group that is allowed to access a destination and ref-
erence allowed level.
Item Definition
Item Definition
No. Displays the registration number.
Name Type in the registration name (up to 24 characters).
Destination Information Specify the address information.
Select "Select from Address Book" or "Direct Input".
Resolution Specifies the resolution.
File Type Specify the file format.
File Name Specify the file name (up to 30 characters).
Page Setting Specify the unit of data to be saved.
Simplex/Duplex Specify whether the original is 2-sided.
Original Type Specify the quality of the original, such as text or photo.
Separate Scan Specify whether to divide scanning of the original.
Density Specify the density.
Background Removal Adjust the density of the background.