Konica Minolta bizhub 601 - Manual (Page 135)

751/601 1-122
Setup items by operation 1
1.40 Performing IP address filtering
Specify settings for performing IP address filtering.
Performing IP address filtering limits access from specified IP addresses. Specify addresses from which this
machine is accessible and inaccessible.
Specify the settings according to the following flowchart.
!
Detail
IP address filtering is not supported in the IPv6 environment.
1.40.1 TCP/IP Settings
Specify settings to use this machine in a TCP/IP network environment.
For details, refer to "Specifying general settings for TCP/IP-based communication" on page 1-2 .
1.40.2 IP Filtering
In Administrator mode of PageScope Web Connection, select the Network tab - "TCP/IP Setting" - "IP
Filtering".
Specify the following settings.
TCP/IP Settings
IP Filtering
Finish
Item Definition Prior confirmation
Permit Access To specify permitted addresses, select "Enable".