Konica Minolta bizhub 20 - Manual (Page 44)

Sending a fax
35
5
Note
• The scan profile of the One-Touch,
Speed-Dial or Group number you chose
first will be applied to the broadcast.
• If the Fax Resolution setting of the fax
number you chose first is S.Fine and you
enter a stored I-Fax number,
Select Std/Fine will appear on the
LCD. Press Stop/Exit. Press Resolution
and choose Standard, Fine or Photo
then re-enter the I-Fax number. If you
want to enter other numbers, go back to
step c.
Cancelling a Broadcast in
progress
5
While broadcasting you can cancel the fax
currently being sent or the whole broadcast
job.
a
Press Menu, 2, 7.
The LCD will display the Broadcast job
number followed by the fax number
being dialled (for example,
#001 0123456789) and the broadcast
job numbers (for example,
Broadcast#001).
b
Press a or b to choose to cancel the fax
being sent or the Broadcast job number.
Press OK.
c
Press 1 to clear the job number or 2 to
exit.
If you chose to only cancel the fax
currently being sent in step b, the
machine will ask you if you want to
cancel the broadcast. Press 1 to clear
the whole broadcast job or 2 to exit.
d
Press Stop/Exit.
Additional sending
operations
5
Sending faxes using multiple
settings
5
Before you send a fax, you can change any
combination of these settings: Contrast,
Resolution, Overseas mode, Delayed fax
timer, Polling transmission, Real time
transmission or Cover page settings.
a
Make sure you are in Fax mode.
After each setting is accepted, the LCD
asks if you want to enter more settings.
22.Setup Send
Next?
a 1.Yes
b 2.No
Select ab or OK
b
Do one of the following:
 To choose more settings, press 1.
The LCD returns to the Setup Send
menu so you can choose another
setting.
 If you have finished choosing
settings, press 2 and go to the next
step for sending your fax.