Konica Minolta bizhub 20 - Manual (Page 142)

Troubleshooting and routine maintenance
133
C
c
Make sure the paper is below the
maximum paper mark (b) of the paper
tray. While pressing the blue paper-
guide release lever, slide the paper
guides to fit the paper size. Make sure
that the guides are firmly in the slots.
d
Put the paper tray firmly back in the
machine.
IMPORTANT
DO NOT take out the standard paper tray
while paper is feeding from a lower paper
tray as this will cause a paper jam.
Paper is jammed inside the machine
C
a
Pull the paper tray completely out of the
machine.
b
Use both hands to slowly pull out the
jammed paper.
c
Press the front cover release button and
open the front cover.
d
Slowly take out the drum unit and toner
cartridge assembly. The jammed paper
may be pulled out with the toner
cartridge and drum unit assembly, or
this may release the paper so you can
pull it out of the paper tray opening.
IMPORTANT
We recommend that you place the drum
unit and toner cartridge assembly on a
clean, flat surface with a sheet of
disposable paper or cloth underneath it in
case you accidentally spill or scatter toner.
To prevent damage to the machine from
static electricity, DO NOT touch the
electrodes shown in the illustration.