Konica Minolta bizhub 20 - Manual (Page 28)

19
3
3
Mode Timer
3
The machine has three mode keys on the
control panel: Fax, Scan, and Copy.
You can set how much time the machine
takes after the last Copy or Scan operation to
return to Fax mode. If you choose Off, the
machine will stay in the mode you used last.
Also, this setting also sets the time the
machine will change from individual user to
the Public user when using Secure Function
Lock. (See Switching Users on page 28.)
a
Press Menu, 1, 1.
b
Press a or b to choose 0 Sec,
30 Secs, 1 Min, 2 Mins, 5 Mins or
Off.
Press OK.
c
Press Stop/Exit.
Paper settings
3
Paper Type
3
Set up the machine for the type of paper you
are using. This will give you the best print
quality.
a
Do one of the following:
 To set the paper type for the
MP Tray press Menu, 1, 2, 1, 1.
 To set the paper type for Tray#1
press Menu, 1, 2, 1, 2.
 To set the paper type for Tray#2
1
press Menu, 1, 2, 1, 3 if you installed
the optional tray.
1
Tray#2 Only or T2 appears only if the
optional tray is installed.
b
Press a or b to choose Thin, Plain,
Thick, Thicker, Transparency or
Recycled Paper.
Press OK.
c
Press Stop/Exit.
Note
You can choose Transparency for Tray
#1 and the MP Tray.
General Setup
3