Konica Minolta bizhub 20 - Manual (Page 157)

148
Replacing periodic
maintenance parts
C
The periodic maintenance parts will need to
be replaced regularly to maintain the print
quality. The parts listed below will have to be
replaced after printing approximately 50,000
pages for PF Kit MP and 100,000 pages for
PF Kit 1, PF Kit 2, Fuser and Laser. Please
call your KONICA MINOLTA dealer when the
following messages appear on the LCD.
Machine Information
C
Checking the Serial Number
C
You can see the machine’s Serial Number on
the LCD.
a
Press Menu, 8, 1.
b
Press Stop/Exit.
Checking the Page Counters
C
You can see the machine’s Page Counters
for copies, printed pages, reports and lists,
faxes or a summary total.
a
Press Menu, 8, 2.
b
Press a or b to see Total, Fax/List,
Copy or Print.
c
Press Stop/Exit.
Checking the remaining life of
parts
C
You can see the remaining life of the
machine’s drum unit and periodic
maintenance parts on the LCD.
a
Press Menu, 8, 3.
b
Press a or b to choose 1.Drum,
2.Fuser, 3.Laser, 4.PF kit MP,
5.PF kit 1 or 6.PF Kit 2
1 .
Press OK.
1
PF Kit 2 appears only when the optional
PF-P10 tray is installed.
c
Press Stop/Exit.
LCD message Description
Replace Part
s
PF kit MP
Replace paper feeding kit for
MP tray.
Replace Part
s
PF kit 1
Replace paper feeding kit for
Tray 1.
Replace Part
s
PF kit 2
Replace paper feeding kit for
Tray 2.
Replace Part
s
Fuser Unit
Replace fuser unit.
Replace Part
s
Laser Unit
Replace laser unit.