Konica Minolta bizhub 40P - Manual (Page 381)

Configuring the Printer 363
CA Certificate Shows whether or not a CA certificate has been
specified for CA reliability verification of server cer-
tificates.
"
Specify the settings from the Network -
Authentication - CA Certificate page.
Server ID Specify the characters for verification through back-
ward matching with the CN attributes of the server
certificate. Specifies the server ID, when EAP Type
is set to EAP-TLS, EAP-TTLS, or PEAP.
Range: Up to 64 characters
Default: [Blank]
Encryption Strength Specify the encryption level of TLS packets with
EAP-TLS/TTLS/PEAP. Specifies the encryption
strength, when EAP Type is set to EAP-TLS,
EAP-TTLS, or PEAP.
Choices: Low, Medium, High
Default: Low
Limit Time of Network
Stop Specify the length of time to postpone stopping the
network when authentication fails from the start of
authentication.
Range: 0, 60 - 255 (seconds)
Default: 0
Apply button Applies the configuration settings for this window.
Clear button Resets all configuration settings to previous values.
Item Description