beautypg.com

Device information, Device information 242, Configuring the printer 242 – Konica Minolta bizhub 40P User Manual

Page 260

background image

Configuring the Printer

242

Device Information

Summary (previous page)
The System - Device Information - Summary window provides the follow-
ing information.

Item

Description

Printer name/status

Shows the name assigned to your printer, and dis-
plays the current status of the printer-just as it's dis-
played on the printer's control panel message
window.

"

The status display allows you to remotely
identify possible printer problems, such as out
of paper and out of toner.

Device Status
(Product image)

Identifies the type of printer that you are browsing.
The printer is pictured in the illustration with its cur-
rent configuration.

Memory

Displays the amount of memory installed in the
printer.

HDD

If an optional hard disk kit is installed in the printer,
displays the size of the hard disk kit.

If no optional hard disk kit is installed in the printer,
displays “Not Installed”.

Memory Card

If an optional CompactFlash card is installed in the
printer, displays the size of the CompactFlash card.

If no optional CompactFlash card is installed in the
printer, displays “Not Installed”.

Duplex

Identifies whether the duplex is “Installed” or “Not
Installed”.

Paper Source

Identifies the paper feed units installed on the
printer.

Output Tray

Identifies the output trays installed on the printer.

Finisher

Identifies whether the offset tray is “Installed” or “Not
Installed”.

Network

Lists the installed printer interface (Ethernet
10Base-T/100Base-TX/1000Base-T).

This manual is related to the following products: