Konica Minolta bizhub 40P - Manual (Page 313)

Configuring the Printer 295
Finisher Settings
"
This page appears only if an optional offset tray is installed.
The Print - Default Settings - Finisher Settings window provides the follow-
ing information.
Item Description
Finishing When Sub Tray is selected, the paper is fed to the
sub output tray.
When Main Tray is selected, the paper is fed to the
main output tray.
When Offset is selected, the paper is fed to the sub
output tray with each copy slightly shifted.
Choices: Sub Tray, Main Tray, Offset
Default: Main Tray
Configuration Menu Equivalent:
PAPER MENU - FINISHING
Job Separating The paper is fed to the sub output tray with each
print job slightly shifted.
Choices: On, Off
Default: Off
Configuration Menu Equivalent:
PAPER MENU - JOB SEPARATION
Apply button Applies the configuration settings for this window.