Konica Minolta bizhub 40P - Manual (Page 247)

Viewing Printer Status 229
Paper Type Indicates the setting for the type of paper
loaded into Tray 2.
Size Setting Indicates whether the paper size for Tray
2 is automatically detected or manually
set.
Tray3
This item
appears only if
an optional lower
feeder unit is
installed.
Paper Size Indicates the setting for the size of paper
loaded into Tray 3.
Width Indicates the paper width when Paper
Size is set to Custom Size.
Length Indicates the paper width when Paper
Size is set to Custom Size.
Paper Type Indicates the setting for the type of paper
loaded into Tray 3.
Size Setting Indicates whether the paper size for Tray
3 is automatically detected or manually
set.
Tray4
This item
appears only if
an optional lower
feeder unit is
installed.
Paper Size Indicates the setting for the size of paper
loaded into Tray 4.
Width Indicates the paper width when Paper
Size is set to Custom Size.
Length Indicates the paper width when Paper
Size is set to Custom Size.
Paper Type Indicates the setting for the type of paper
loaded into Tray 4.
Size Setting Indicates whether the paper size for Tray
4 is automatically detected or manually
set.
Tray Chaining If Enable is indicated and the specified
paper tray runs out of paper during print-
ing, a paper tray loaded with paper of the
same size is automatically selected so
printing can continue.
If Disable is indicated and the specified
paper tray runs out of paper, printing
stops.
Item Description